Release notes

Version 4.05.0 released on 4/27/2022
  • Fixed unit display of USA continuous beam module
Version 4.04.0 released on 2/1/2022
  • Fixed Unit of support reaction table
  • Added ReCaptcha to contact form
Version 4.03.0 released on 12/14/2021
  • Added Message when no Eigenfrequencies could be found
Version 4.02.0 released on 12/7/2021
  • Fixed Bug in Rib-Panel Module: No calculation results after release of version 4.0.0
Version 4.01.0 released on 12/4/2021
  • CLT Rex option removed from continous beam
Version 4.00.1 released on 12/3/2021
  • SE rib panel with new ETA enabled
Version 4.00.0 released on 11/29/2021
  • New Release Calculatis 2022:
    SE rib panel with new ETA
    Foor and roof module for USA
    new material from SPAX International and Simpson Strong-Tie
Version 3.63.0 released on 11/15/2021
  • Create Project: Fixed bug filling initials engineer field
Version 3.62.0 released on 11/11/2021
  • Connection module: Fixed bug selecting screw setup
  • New disclaimer
  • Fixed Bug in user Interface of acoustic modul
Version 3.61.0 released on 10/8/2021
  • Wall module: Fixed bug when deleting void
  • Timber-concrete composite floor: Fixed bug in support design calculation
Version 3.61.0 released on 10/8/2021
  • Wall module: Fixed bug when deleting void
  • Timber-concrete composite floor: Fixed bug in support design calculation
Version 3.60.0 released on 7/28/2021
  • LVL Rib Panels: Changed screw count of suspension screws
Version 3.59.0 released on 7/2/2021
  • CLT Rib Panels: Calculation of Kser changed
  • CLT Rib Panel Bugfix Supportdesign: Calcualtion of width
Version 3.58.1 released on 6/21/2021
  • Update LVL Materiel properties
Version 3.58.0 released on 6/18/2021
  • Display of kdef for all Rib Panels
Version 3.57.0 released on 6/8/2021
  • Added new Screws from manufacturer SPAX
  • Added new angles from manufacturer Simpson Strong tie
Version 3.56.0 released on 6/1/2021
  • Translation updates
Version 3.55.0 released on 5/30/2021
  • LVL Panel: Fixed translation text
  • LVL Panel: removed "Spacing for lateral bracing"
  • LVL Rib Panel: fixed bug in self weight calculation for arrangements "both sides" and "flange"
  • Edit/Create Project: Altitude is a required field for Switzerland
Version 3.54.1 released on 5/28/2021
  • Update of cross section values for LVL G Materials.
Version 3.54.0 released on 5/19/2021
  • Bugfix wall module: Error on adding new loads.
Version 3.53.0 released on 5/18/2021
  • Bugfix CLT column module: Error on creation of detailed result PDF.
  • Bugfix creation new material template
Version 3.52.0 released on 5/6/2021
  • Vibration analysis continous beam: Adapted utilisation rate
  • Bugfix Vibration analysis wooden beam in calculation of frequency criterion min
  • Bugfix LVL Panel module: bug in fire calculation fixed
Version 3.51.1 released on 5/5/2021
  • Loadcase Template wind for UK: Changed load-duration class from short term to instantaneous
Version 3.51.0 released on 4/22/2021
  • Fixed bug in rip panel by stora enso when creating new calcualtion
  • Fixed bug in LVL Panel module: Wrong material was selectable
Version 3.50.0 released on 4/19/2021
  • Fixed bug in lateral torsional buckling introduced with version 3.49.0
  • Fixed bug in SLS design for france: display wrong limit value for span > 7 m, but utilisation is calculated correct.
Version 3.49.0 released on 4/13/2021
  • Vibration analysis continous beam: Stiffness in cross direction will also be taken into account for longitudinal direction in wooden beam, timber-concrete composite floor
  • New LVL-G Material available
Version 3.48.0 released on 4/2/2021
  • Vibration analysis continous beam: Stiffness in cross direction will also be taken into account for longitudinal direction in CLP panel
  • New CLT Panel type CLT-REX available in CLT continous beam
Version 3.47.0 released on 3/23/2021
  • Bugfix Accustic module: Error in last Floorpackage fixed
  • Bugfix timber-concrete composite floor module: Fixed error on creating PDF document
  • Bug fix Vibration analysis: Modal mass related to tributary width according to EN1995-1-1, NA.7.2-E3, Austrian NA, not total width for all continous beam modules
  • Bug fix Vibration analysis timber-concrete composite floor module: Fixed Bug in calculation of eigenfrequency
Version 3.46.0 released on 3/7/2021
  • Updated contact form
Version 3.45.0 released on 2/24/2021
  • Check user profile
Version 3.44.0 released on 1/27/2021
  • Bugfix EC5 design: Fixed Error in buckling design when My and Mz values exists.
Version 3.43.0 released on 1/25/2021
  • Bugfix timber-concrete composite floor module: Fixed Error on connection design
Version 3.42.0 released on 12/18/2020
  • Bugfix kv value: Fixed error introduced in version 3.41
Version 3.41.0 released on 12/15/2020
  • Bugfix Wall module: Fixed Error on fire design
  • Bugfix Accustic module: In some cases layers where not drawn in sketch of element type ceiling
Version 3.40.0 released on 9/15/2020
  • Bugfix Wall modul: fixed utilisation factor for buckling design introduced in version 3.39
Version 3.39.0 released on 9/14/2020
  • Bugfix timber-concrete composite floor: Error when calculating design connection to concrete with rigid connection
  • Bugfix connection design: Some Würth screws has been disabled to use them crossed
  • Bugfix pdf file: Some lines where printed twice
  • Bugfix wall module: Using fcd/ftd in normal force design
  • Bugfix connection design of connection board: Fixed position of screws when 2 rows are selected
  • Some modules used tpen insted of leff when calculating Fax,rk
  • Some Bugfixes and improvements in connection module
  • New Modules and features
Version 2.38.1 released on 6/9/2020
  • Material Database: Gamma M for Italy updated for following materials:
    CLT: 1,35
    LVL: 1,3
    Glulam: 1,35
  • Vibration: Updated F0=700 for Australia
Version 2.38.0 released on 5/25/2020
  • Bugfix Wall Module : Error in Results, when no fire calculation selected with continuous supports
Version 2.37.0 released on 5/24/2020
  • Bugfix in PDF: Fixed Error generating PDF Dokument when there are no forces for fire design available
  • Bugfix in PDF: Fixed Error generating rip deck PDF Dokument when rip is rigid connected and design connection to rip ist activated
Version 2.36.1 released on 5/8/2020
  • Bugfix Material Database: Update of some general and strength values of clt materials.
Version 2.36.0 released on 5/6/2020
  • Bugfix in CLT Fire calculation with fireprotection cladding: k0*d0 was not taken into account.
  • Bugfix in Modul CLT Header: Coverlayers in support design where interchanged
Version 2.35.0 released on 4/16/2020
  • Added missing language translations.
Version 2.34.0 released on 3/12/2020
  • LVL Rib panel: Rib width of 63 mm added.
  • Bugfix vibration: Eigenvalue result of 0 Hz will be not taken into account.
Version 2.33.0 released on 1/22/2020
  • Bugfix in PDF Report of project with connection design results.
Version 2.32.0 released on 1/16/2020
  • Update of contact form and registration form
Version 2.32.0 released on 1/16/2020
  • Update of contact and registration form
Version 2.31.0 released on 12/3/2019
  • Bugfix in Connection Design: Calculation of Fax fixed
  • Bugfix in wall module: Calculation of τIP,net fixed
Version 2.30.0 released on 9/24/2019
  • Bugfix in EC3 Design: Calculation of utilisation of buckling design fixed
Version 2.29.0 released on 9/15/2019
  • Bugfix in My Account: Delete Account failed when projects exists
  • Bugfix Connection design: Splitting stress analysis calculated with reduced cross section.
  • PDF Output of Project: Added Stora Enso Rib Panel (ETA) and LVL rib panel
Version 2.28.0 released on 7/31/2019
  • Bugfix PDF Output bearing pressure analysis: Grafic for cover layer direction corrected
Version 2.27.0 released on 7/29/2019
  • Bugfix PDF Output Panel: SLS grafic and header corrected
Version 2.26.0 released on 7/28/2019
  • Bugfix in EC5: Kl corrected
  • PDF Output: Added kdef in all modules
  • PDF Output of hygrothermal analysis:
    Numbering of layers in scetch corrected
    Display of flow direction corrected
  • Support module Gluelam-CLT: changed fc,90,k to fc,0,k for CLT panel
  • Update SLS design for NA France
Version 2.25.1 released on 1/21/2019
  • Bugfix in material data base: G0,05 of CLT was for some materials too low (54 instead of 460 N/mm²)
Version 2.25.0 released on 1/11/2019
  • Bugfix in module timber-concrete composite floor: Kser of TiComTec corrected
Version 2.24.0 released on 12/20/2018
  • Updates for admin users
  • Display Kh and Kl values in result views and PDF
  • Bugfix: Changed text of unit of SLS net fin in PDF
  • Bugfix Connection design:
    Screwposition corrected for centered positioned screws
    solid timber & glulam: embedding strength corrected
Version 2.23.2 released on 11/19/2018
  • LVL Statik values updated
Version 2.23.1 released on 11/8/2018
  • LVL Statik values updated
Version 2.23.1 released on 11/8/2018
  • LVL Statik values updated
  • X-LVL Statik values inserted
Version 2.23.0 released on 10/14/2018
  • Added UI Features for admin users
Version 2.22.0 released on 10/9/2018
  • Bugfix SLS design for Spain: calculation for w fin corrected to w[char] + w[q.p.∞]*kdef
  • Bugfix wall & deep beab design module: Scetch of support forces corrected
  • Added Version Information to PDF documents
Version 2.21.0 released on 10/4/2018
  • Connection design: pre-drilled added in connection type of two timber beams
  • Bugfix Connection design module: Fax,rk = Max(Fhead,rk, Fax1,rk)
  • Bugfix Connection design module: fvrk for connections with steel plate
  • UI changes of project details page: Collapse empty panels
Version 2.20.0 released on 9/6/2018
  • Bugfix header: Unable to get detailed PDF Results
  • Bugfix panel:
    Error in calculation of SLS results
    Unable to get detailed PDF results
Version 2.19.0 released on 8/31/2018
  • Bugfix timber-concrete composite floor:
    Shear force = 0 in some cases
    Update PDF Output
  • Connection Design: Adaption of Rothoblaas Screws for connector positions in end grain
  • Bug fix Vibration analysis: Modal mass related to tributary width according to EN1995-1-1, NA.7.2-E3, Austrian NA, not total width.
Version 2.18.0 released on 8/13/2018
  • Connection design module:
    Bugfix Type "CLT butt joint with splice board": Required minimum width corrected
    Bugfix all connection types: For all non CLT elements a1 was always used for distances where a2 has to be taken into account.
  • Adjustments to the SLS design for projects in France, according to French national annex of EN1995-1-1
  • New CLT Rip Panel design module, according to ETA-17/0911, available
Version 2.17.0 released on 5/25/2018
  • Bugfix: Registration
Version 2.16.0 released on 5/24/2018
  • Implementation of Dataprotection
  • Release Notes
Version 2.15.0 released on 4/14/2018
  • Standard EN FR: Changed kdef for CLT Class 1 and Class 2